よくあるご質問

前の画面に戻る

質問

What settings do I need to set up after installing a printer driver ?(FAQ No.01928)

回答

When you installed a printer driver you need to configure the driver to accommodate installed trays and finisher etc. to the machine. Normally, this setup is automatically set at the installation of a printer driver to accommodate MFP’s optional device configuration. When you unchecked [Auto Configuration] or change the settings, please follow the procedure below.
The following procedure takes BP-70C26 as an example.

You can configure the settings automatically or manually.
Please set up manually if you use IPv6 for a network connection or when Auto Set does not work properly.


Procedure for Auto Set

1. Open [Printer Properties].

2. Show Configuration.

Click the [Configuration] tab.

3. Start Auto Configuration.

When you click the [Auto Configuration] button, the setting update begins automatically.

4. Update Machine Image (configuration).

Check each item that automatically updated then click the [OK] button.

Procedure for Manual Setting

1. Open [Printer Properties].

2. Show Configuration.

Click the [Configuration] tab.

3. Configure the Settings for Paper Feeding/ Exit Options etc.

For the settings of Paper Feeding/ Exit Options etc., you should check the installed options by sight.

4. Set Up the Tray(s).

Click the [Set Tray Status] button.

5. Check the Tray Settings on the Touch Panel.

Check the tray settings on the operation panel.
Tap the [Settings] key on the operation panel.

Reference Information

  • Language change for the operation panel and Web control screen
    How to change the display language of operation panel or Web control screen.

    - Want to change the display language for the Operation Panel and the Control Screen on the Web.

  • 6. Open [Common Settings] page.

    Tap [Common Settings].

    7. Open [Paper Settings] page.

    Tap [Paper Settings].

    8. Open the [Paper Tray Settings] Page.

    Tap [Paper Tray Settings].

    9. Register the Settings to [Tray Settings].

    Looking up all settings information and copy the settings to the tray settings of [Printer Properties].

    10. Complete the Setup.

    Click the two [OK] buttons to complete the setup.

    関連キーワード

    Printer Driver / Driver / Install / Set up / Settings / Configuration / Tray / Auto Set / Manual setting / Windows

    各製品のよくあるご質問トップに戻る

    BP-40C26 / BP-40C36 / BP-50C45 / BP-50C55 / BP-50C65 / BP-60C26 / BP-60C31 / BP-60C36 / BP-70C26 / BP-70C45 / BP-70C55 / BP-70C65

    更新日:2022年06月13日